How to set the patient up with the Virtualis VR headset and accessories

Transcript

This is how to mount the VR headset on your patient and how to use the accessories for your Virtualis solution.

When your Virtualis solution is set up in a defined area, invite the patient to stand or sit near the computer.

Place the headset on the patient.

Start by fitting the headset to the back of the patient's head, then place the goggles over the patient's eyes, turn the adjustment dial at the back until the headset fits firmly, and comfortably adjust the strap on top to fit and balance the weight of the headset on the patient's head.

Then flip the earphones in place.

The image should be clear in the headset.

If it is not, move the front of the headset up and down until a clear image is found and tighten the headset to maintain the position.

If controllers are needed for the module, turn them on by pressing and holding the lower button until the light turns green.